Hgames Wiki - User contributions [en]

Sexy Beach Premium Resort/FAQ Technical Help

2015-09-14T18:34:05Z

Dilldoe: /* FAQ */

{{Sexy_Beach_Premium_Resort}}
=FAQ=
*'''Q: The resolution I want to play at is not shown in the launcher. Is there anything I can do?''' A: You can manually override the resolution by editing <tt>UserData/setup.xml</tt> file. However, DO NOT run the launcher afterwards (because it will be reset your values to default 1280x720) unless you messed up and need a settings reset. Run the game executable (SexyBeachPR_32.exe etc.) DIRECTLY instead. Note that if you use non-16:9 resolution, some minor glitches may occur, during cut-scenes for example.

[[File:sbpr_focus_issue.jpg|thumb|Out of focus]]
*'''Q: Is there a way to get the close up on characters not to blur out (see picture "Out of focus" on the right)?''' A: It is caused by you having moved the focus point of the camera past the character (probably by "zooming" in by holding both mouse buttons). To fix it, click ''Reset camera'' or move the focus (white cross visible when moving the camera) to be at the center of the character. Click the right mouse button and move left/right to zoom instead of both mouse buttons.

*'''Q: The game lags. Is there a way to improve performance?''' A: I have an ATI R9 x280, quality 0, 1 or 2 is 10fps or less. Open Catalyst -> add SBPR to the 3D application list -> Overwrite all you can with ATI instead of allowing the 3D application to choose. The game will still be laggy, is maybe 20-26 fps and looks much better.

*'''Q: I need more in-game money and/or mini-games points. How do I cheat?''' A: Use either general cheating tools (such as Cheat Engine or ArtMoney) or edit your mainData.dat save file located in <tt>UserData\save</tt> directory using hex editor of your choice (make the backup first!). The value you're looking for is around offset 0x980. For example, new game starts with 3000, so you will see <tt>"B8 0B 00 00"</tt> byte sequence at offset 0x98A or so. If you want to have 1000000 instead, change that <tt>"B8 0B 00 00"</tt> to <tt>"40 42 0F 00"</tt>. Save game is unprotected as of now, so when you load this modified save, you'll have your million for free. As for the mini-games points, they are stored 4 (null) bytes past money.

*'''Q: How do I increase my massage skill past certain level?''' A: When you open your item box (M -> items) there is a green bar there. It's your current massage experience. You have to fill that bar before you advance your level. To do so - simply initiate some H scene (there is a bench and a couple beds near Guru so you don't need to walk far). Just enter and exit the scene a couple times and your bar will be filled, then talk to Guru again to level up.

*'''Q: How do I add my custom made girl in the game?''' A: On the title screen click the 'Sign Up' button. You'll see 2 list, list of your custom made girls (on the left) and list of girls on the island (on the right). Choose your custom made girl on the left list and add it to the right (use the button with the >>> in the middle of the screen). Click the 2nd button (on the right) on the bottom of the screen to accept change. Hard part now is to find the girl on the island cause she is randomly placed. Go into config and max out 'Heroine count on island' to improve your chance of finding her. 
:''-Alternatively-'' If you have a main girl (or any girl) with 3 hearts. Ask them out (option where they follow you) and go into the Dressing Room (F). There you can replace that girl with your custom girl and go straight into H scenes without having to get more hearts.

=Installing the Game=

==Quick step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) to e.g. <tt>C:\Downloads\SBPR</tt>
#Mount <tt>C:\Downloads\SBPR\DISK1.mdf</tt> with [http://www.disk-tools.com/download/daemon Daemontools Lite] (other mounting software has been known to fail with Japanese games, so please use Daemontools Lite - it's completely free)
#DO NOT autorun, but explore the mounted dvd and right-click <tt>Startup.exe</tt> and select ''Run with Japanese locale as administrator'' (you need [http://www.hongfire.com/forum/showthread.php/328830 HF pApploc] for the right-click options).
#Click the second button from the top to start the Sexy Beach Premium Resort setup.
#Click (N) a few times and wait while the setup installs.
#About two-thirds the setup will ask for disk 2, so mount DISK2.mdf and then click OK.
#To run the game, simply right-click the <tt>InitSettings.exe</tt> in the game folder (or the shortcut linked to it), select ''Run with Japanese locale as administrator'' to open the launcher and then click the ''ゲーム開始'' button on the far left to run the game.

==Simple step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) from .rar archive(s) to e.g. <tt>C:\Downloads\SBPR</tt>
#Extract the content of both .mdf files (using 7-Zip or WinRAR) to e.g. <tt>C:\Downloads\SBPR\setup</tt>, overwriting existing files. You should end up with five .cab files in there.
#Start <tt>setup.exe</tt>. The locale doesn't matter in this case.
#Click (N) a few times and wait while the setup installs.
#Run <tt>InitSettings.exe</tt> in the game folder to change video options (resolution and picture quality) in accordance with your preferences and hardware.
#Once you're satisfied with video options, you can skip the launcher and run the game or poser directly from the appropriate executable (SexyBeachPR_32.exe, SexyBeachStudio_64.exe etc.) in the game directory.

Sexy Beach Premium Resort/FAQ Technical Help

2015-09-14T18:33:36Z

Dilldoe: /* FAQ */

{{Sexy_Beach_Premium_Resort}}
=FAQ=
*'''Q: The resolution I want to play at is not shown in the launcher. Is there anything I can do?''' A: You can manually override the resolution by editing <tt>UserData/setup.xml</tt> file. However, DO NOT run the launcher afterwards (because it will be reset your values to default 1280x720) unless you messed up and need a settings reset. Run the game executable (SexyBeachPR_32.exe etc.) DIRECTLY instead. Note that if you use non-16:9 resolution, some minor glitches may occur, during cut-scenes for example.

[[File:sbpr_focus_issue.jpg|thumb|Out of focus]]
*'''Q: Is there a way to get the close up on characters not to blur out (see picture "Out of focus" on the right)?''' A: It is caused by you having moved the focus point of the camera past the character (probably by "zooming" in by holding both mouse buttons). To fix it, click ''Reset camera'' or move the focus (white cross visible when moving the camera) to be at the center of the character. Click the right mouse button and move left/right to zoom instead of both mouse buttons.

*'''Q: The game lags. Is there a way to improve performance?''' A: I have an ATI R9 x280, quality 0, 1 or 2 is 10fps or less. Open Catalyst -> add SBPR to the 3D application list -> Overwrite all you can with ATI instead of allowing the 3D application to choose. The game will still be laggy, is maybe 20-26 fps and looks much better.

*'''Q: I need more in-game money and/or mini-games points. How do I cheat?''' A: Use either general cheating tools (such as Cheat Engine or ArtMoney) or edit your mainData.dat save file located in <tt>UserData\save</tt> directory using hex editor of your choice (make the backup first!). The value you're looking for is around offset 0x980. For example, new game starts with 3000, so you will see <tt>"B8 0B 00 00"</tt> byte sequence at offset 0x98A or so. If you want to have 1000000 instead, change that <tt>"B8 0B 00 00"</tt> to <tt>"40 42 0F 00"</tt>. Save game is unprotected as of now, so when you load this modified save, you'll have your million for free. As for the mini-games points, they are stored 4 (null) bytes past money.

*'''Q: How do I increase my massage skill past certain level?''' A: When you open your item box (M -> items) there is a green bar there. It's your current massage experience. You have to fill that bar before you advance your level. To do so - simply initiate some H scene (there is a bench and a couple beds near Guru so you don't need to walk far). Just enter and exit the scene a couple times and your bar will be filled, then talk to Guru again to level up.

*'''Q: How do I add my custom made girl in the game?''' A: On the title screen click the 'Sign Up' button. You'll see 2 list, list of your custom made girls (on the left) and list of girls on the island (on the right). Choose your custom made girl on the left list and add it to the right (use the button with the >>> in the middle of the screen). Click the 2nd button (on the right) on the bottom of the screen to accept change. Hard part now is to find the girl on the island cause she is randomly placed. Go into config and max out 'Heroine count on island' to improve your chance of finding her. 
:<big>-Alternatively-</big>
 If you have a main girl (or any girl) with 3 hearts. Ask them out (option where they follow you) and go into the Dressing Room (F). There you can replace that girl with your custom girl and go straight into H scenes without having to get more hearts.

=Installing the Game=

==Quick step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) to e.g. <tt>C:\Downloads\SBPR</tt>
#Mount <tt>C:\Downloads\SBPR\DISK1.mdf</tt> with [http://www.disk-tools.com/download/daemon Daemontools Lite] (other mounting software has been known to fail with Japanese games, so please use Daemontools Lite - it's completely free)
#DO NOT autorun, but explore the mounted dvd and right-click <tt>Startup.exe</tt> and select ''Run with Japanese locale as administrator'' (you need [http://www.hongfire.com/forum/showthread.php/328830 HF pApploc] for the right-click options).
#Click the second button from the top to start the Sexy Beach Premium Resort setup.
#Click (N) a few times and wait while the setup installs.
#About two-thirds the setup will ask for disk 2, so mount DISK2.mdf and then click OK.
#To run the game, simply right-click the <tt>InitSettings.exe</tt> in the game folder (or the shortcut linked to it), select ''Run with Japanese locale as administrator'' to open the launcher and then click the ''ゲーム開始'' button on the far left to run the game.

==Simple step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) from .rar archive(s) to e.g. <tt>C:\Downloads\SBPR</tt>
#Extract the content of both .mdf files (using 7-Zip or WinRAR) to e.g. <tt>C:\Downloads\SBPR\setup</tt>, overwriting existing files. You should end up with five .cab files in there.
#Start <tt>setup.exe</tt>. The locale doesn't matter in this case.
#Click (N) a few times and wait while the setup installs.
#Run <tt>InitSettings.exe</tt> in the game folder to change video options (resolution and picture quality) in accordance with your preferences and hardware.
#Once you're satisfied with video options, you can skip the launcher and run the game or poser directly from the appropriate executable (SexyBeachPR_32.exe, SexyBeachStudio_64.exe etc.) in the game directory.

Sexy Beach Premium Resort/FAQ Technical Help

2015-09-14T18:32:35Z

Dilldoe: /* FAQ */

{{Sexy_Beach_Premium_Resort}}
=FAQ=
*'''Q: The resolution I want to play at is not shown in the launcher. Is there anything I can do?''' A: You can manually override the resolution by editing <tt>UserData/setup.xml</tt> file. However, DO NOT run the launcher afterwards (because it will be reset your values to default 1280x720) unless you messed up and need a settings reset. Run the game executable (SexyBeachPR_32.exe etc.) DIRECTLY instead. Note that if you use non-16:9 resolution, some minor glitches may occur, during cut-scenes for example.

[[File:sbpr_focus_issue.jpg|thumb|Out of focus]]
*'''Q: Is there a way to get the close up on characters not to blur out (see picture "Out of focus" on the right)?''' A: It is caused by you having moved the focus point of the camera past the character (probably by "zooming" in by holding both mouse buttons). To fix it, click ''Reset camera'' or move the focus (white cross visible when moving the camera) to be at the center of the character. Click the right mouse button and move left/right to zoom instead of both mouse buttons.

*'''Q: The game lags. Is there a way to improve performance?''' A: I have an ATI R9 x280, quality 0, 1 or 2 is 10fps or less. Open Catalyst -> add SBPR to the 3D application list -> Overwrite all you can with ATI instead of allowing the 3D application to choose. The game will still be laggy, is maybe 20-26 fps and looks much better.

*'''Q: I need more in-game money and/or mini-games points. How do I cheat?''' A: Use either general cheating tools (such as Cheat Engine or ArtMoney) or edit your mainData.dat save file located in <tt>UserData\save</tt> directory using hex editor of your choice (make the backup first!). The value you're looking for is around offset 0x980. For example, new game starts with 3000, so you will see <tt>"B8 0B 00 00"</tt> byte sequence at offset 0x98A or so. If you want to have 1000000 instead, change that <tt>"B8 0B 00 00"</tt> to <tt>"40 42 0F 00"</tt>. Save game is unprotected as of now, so when you load this modified save, you'll have your million for free. As for the mini-games points, they are stored 4 (null) bytes past money.

*'''Q: How do I increase my massage skill past certain level?''' A: When you open your item box (M -> items) there is a green bar there. It's your current massage experience. You have to fill that bar before you advance your level. To do so - simply initiate some H scene (there is a bench and a couple beds near Guru so you don't need to walk far). Just enter and exit the scene a couple times and your bar will be filled, then talk to Guru again to level up.

*'''Q: How do I add my custom made girl in the game?''' A: On the title screen click the 'Sign Up' button. You'll see 2 list, list of your custom made girls (on the left) and list of girls on the island (on the right). Choose your custom made girl on the left list and add it to the right (use the button with the >>> in the middle of the screen). Click the 2nd button (on the right) on the bottom of the screen to accept change. Hard part now is to find the girl on the island cause she is randomly placed. Go into config and max out 'Heroine count on island' to improve your chance of finding her.
:-Alternatively-
:If you have a main girl (or any girl) with 3 hearts. Ask them out (option where they follow you) and go into the Dressing Room (F). There you can replace that girl with your custom girl and go straight into H scenes without having to get more hearts.

=Installing the Game=

==Quick step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) to e.g. <tt>C:\Downloads\SBPR</tt>
#Mount <tt>C:\Downloads\SBPR\DISK1.mdf</tt> with [http://www.disk-tools.com/download/daemon Daemontools Lite] (other mounting software has been known to fail with Japanese games, so please use Daemontools Lite - it's completely free)
#DO NOT autorun, but explore the mounted dvd and right-click <tt>Startup.exe</tt> and select ''Run with Japanese locale as administrator'' (you need [http://www.hongfire.com/forum/showthread.php/328830 HF pApploc] for the right-click options).
#Click the second button from the top to start the Sexy Beach Premium Resort setup.
#Click (N) a few times and wait while the setup installs.
#About two-thirds the setup will ask for disk 2, so mount DISK2.mdf and then click OK.
#To run the game, simply right-click the <tt>InitSettings.exe</tt> in the game folder (or the shortcut linked to it), select ''Run with Japanese locale as administrator'' to open the launcher and then click the ''ゲーム開始'' button on the far left to run the game.

==Simple step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) from .rar archive(s) to e.g. <tt>C:\Downloads\SBPR</tt>
#Extract the content of both .mdf files (using 7-Zip or WinRAR) to e.g. <tt>C:\Downloads\SBPR\setup</tt>, overwriting existing files. You should end up with five .cab files in there.
#Start <tt>setup.exe</tt>. The locale doesn't matter in this case.
#Click (N) a few times and wait while the setup installs.
#Run <tt>InitSettings.exe</tt> in the game folder to change video options (resolution and picture quality) in accordance with your preferences and hardware.
#Once you're satisfied with video options, you can skip the launcher and run the game or poser directly from the appropriate executable (SexyBeachPR_32.exe, SexyBeachStudio_64.exe etc.) in the game directory.

Sexy Beach Premium Resort/FAQ Technical Help

2015-09-14T18:32:03Z

Dilldoe: /* FAQ */

{{Sexy_Beach_Premium_Resort}}
=FAQ=
*'''Q: The resolution I want to play at is not shown in the launcher. Is there anything I can do?''' A: You can manually override the resolution by editing <tt>UserData/setup.xml</tt> file. However, DO NOT run the launcher afterwards (because it will be reset your values to default 1280x720) unless you messed up and need a settings reset. Run the game executable (SexyBeachPR_32.exe etc.) DIRECTLY instead. Note that if you use non-16:9 resolution, some minor glitches may occur, during cut-scenes for example.

[[File:sbpr_focus_issue.jpg|thumb|Out of focus]]
*'''Q: Is there a way to get the close up on characters not to blur out (see picture "Out of focus" on the right)?''' A: It is caused by you having moved the focus point of the camera past the character (probably by "zooming" in by holding both mouse buttons). To fix it, click ''Reset camera'' or move the focus (white cross visible when moving the camera) to be at the center of the character. Click the right mouse button and move left/right to zoom instead of both mouse buttons.

*'''Q: The game lags. Is there a way to improve performance?''' A: I have an ATI R9 x280, quality 0, 1 or 2 is 10fps or less. Open Catalyst -> add SBPR to the 3D application list -> Overwrite all you can with ATI instead of allowing the 3D application to choose. The game will still be laggy, is maybe 20-26 fps and looks much better.

*'''Q: I need more in-game money and/or mini-games points. How do I cheat?''' A: Use either general cheating tools (such as Cheat Engine or ArtMoney) or edit your mainData.dat save file located in <tt>UserData\save</tt> directory using hex editor of your choice (make the backup first!). The value you're looking for is around offset 0x980. For example, new game starts with 3000, so you will see <tt>"B8 0B 00 00"</tt> byte sequence at offset 0x98A or so. If you want to have 1000000 instead, change that <tt>"B8 0B 00 00"</tt> to <tt>"40 42 0F 00"</tt>. Save game is unprotected as of now, so when you load this modified save, you'll have your million for free. As for the mini-games points, they are stored 4 (null) bytes past money.

*'''Q: How do I increase my massage skill past certain level?''' A: When you open your item box (M -> items) there is a green bar there. It's your current massage experience. You have to fill that bar before you advance your level. To do so - simply initiate some H scene (there is a bench and a couple beds near Guru so you don't need to walk far). Just enter and exit the scene a couple times and your bar will be filled, then talk to Guru again to level up.

*'''Q: How do I add my custom made girl in the game?''' A: On the title screen click the 'Sign Up' button. You'll see 2 list, list of your custom made girls (on the left) and list of girls on the island (on the right). Choose your custom made girl on the left list and add it to the right (use the button with the >>> in the middle of the screen). Click the 2nd button (on the right) on the bottom of the screen to accept change. Hard part now is to find the girl on the island cause she is randomly placed. Go into config and max out 'Heroine count on island' to improve your chance of finding her.
:-Alternatively-
:If you have a main girl (or any girl) with 3 stars. Ask them out (option where they follow you) and go into the Dressing Room (F). There you can replace that girl with your custom girl and go straight into H scenes without having to get more hearts.

=Installing the Game=

==Quick step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) to e.g. <tt>C:\Downloads\SBPR</tt>
#Mount <tt>C:\Downloads\SBPR\DISK1.mdf</tt> with [http://www.disk-tools.com/download/daemon Daemontools Lite] (other mounting software has been known to fail with Japanese games, so please use Daemontools Lite - it's completely free)
#DO NOT autorun, but explore the mounted dvd and right-click <tt>Startup.exe</tt> and select ''Run with Japanese locale as administrator'' (you need [http://www.hongfire.com/forum/showthread.php/328830 HF pApploc] for the right-click options).
#Click the second button from the top to start the Sexy Beach Premium Resort setup.
#Click (N) a few times and wait while the setup installs.
#About two-thirds the setup will ask for disk 2, so mount DISK2.mdf and then click OK.
#To run the game, simply right-click the <tt>InitSettings.exe</tt> in the game folder (or the shortcut linked to it), select ''Run with Japanese locale as administrator'' to open the launcher and then click the ''ゲーム開始'' button on the far left to run the game.

==Simple step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) from .rar archive(s) to e.g. <tt>C:\Downloads\SBPR</tt>
#Extract the content of both .mdf files (using 7-Zip or WinRAR) to e.g. <tt>C:\Downloads\SBPR\setup</tt>, overwriting existing files. You should end up with five .cab files in there.
#Start <tt>setup.exe</tt>. The locale doesn't matter in this case.
#Click (N) a few times and wait while the setup installs.
#Run <tt>InitSettings.exe</tt> in the game folder to change video options (resolution and picture quality) in accordance with your preferences and hardware.
#Once you're satisfied with video options, you can skip the launcher and run the game or poser directly from the appropriate executable (SexyBeachPR_32.exe, SexyBeachStudio_64.exe etc.) in the game directory.

Sexy Beach Premium Resort/FAQ Technical Help

2015-09-14T18:31:42Z

Dilldoe: /* FAQ */

{{Sexy_Beach_Premium_Resort}}
=FAQ=
*'''Q: The resolution I want to play at is not shown in the launcher. Is there anything I can do?''' A: You can manually override the resolution by editing <tt>UserData/setup.xml</tt> file. However, DO NOT run the launcher afterwards (because it will be reset your values to default 1280x720) unless you messed up and need a settings reset. Run the game executable (SexyBeachPR_32.exe etc.) DIRECTLY instead. Note that if you use non-16:9 resolution, some minor glitches may occur, during cut-scenes for example.

[[File:sbpr_focus_issue.jpg|thumb|Out of focus]]
*'''Q: Is there a way to get the close up on characters not to blur out (see picture "Out of focus" on the right)?''' A: It is caused by you having moved the focus point of the camera past the character (probably by "zooming" in by holding both mouse buttons). To fix it, click ''Reset camera'' or move the focus (white cross visible when moving the camera) to be at the center of the character. Click the right mouse button and move left/right to zoom instead of both mouse buttons.

*'''Q: The game lags. Is there a way to improve performance?''' A: I have an ATI R9 x280, quality 0, 1 or 2 is 10fps or less. Open Catalyst -> add SBPR to the 3D application list -> Overwrite all you can with ATI instead of allowing the 3D application to choose. The game will still be laggy, is maybe 20-26 fps and looks much better.

*'''Q: I need more in-game money and/or mini-games points. How do I cheat?''' A: Use either general cheating tools (such as Cheat Engine or ArtMoney) or edit your mainData.dat save file located in <tt>UserData\save</tt> directory using hex editor of your choice (make the backup first!). The value you're looking for is around offset 0x980. For example, new game starts with 3000, so you will see <tt>"B8 0B 00 00"</tt> byte sequence at offset 0x98A or so. If you want to have 1000000 instead, change that <tt>"B8 0B 00 00"</tt> to <tt>"40 42 0F 00"</tt>. Save game is unprotected as of now, so when you load this modified save, you'll have your million for free. As for the mini-games points, they are stored 4 (null) bytes past money.

*'''Q: How do I increase my massage skill past certain level?''' A: When you open your item box (M -> items) there is a green bar there. It's your current massage experience. You have to fill that bar before you advance your level. To do so - simply initiate some H scene (there is a bench and a couple beds near Guru so you don't need to walk far). Just enter and exit the scene a couple times and your bar will be filled, then talk to Guru again to level up.

*'''Q: How do I add my custom made girl in the game?''' A: On the title screen click the 'Sign Up' button. You'll see 2 list, list of your custom made girls (on the left) and list of girls on the island (on the right). Choose your custom made girl on the left list and add it to the right (use the button with the >>> in the middle of the screen). Click the 2nd button (on the right) on the bottom of the screen to accept change. Hard part now is to find the girl on the island cause she is randomly placed. Go into config and max out 'Heroine count on island' to improve your chance of finding her.
:Indented line
-Alternatively-
:Indented line
If you have a main girl (or any girl) with 3 stars. Ask them out (option where they follow you) and go into the Dressing Room (F). There you can replace that girl with your custom girl and go straight into H scenes without having to get more hearts.

=Installing the Game=

==Quick step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) to e.g. <tt>C:\Downloads\SBPR</tt>
#Mount <tt>C:\Downloads\SBPR\DISK1.mdf</tt> with [http://www.disk-tools.com/download/daemon Daemontools Lite] (other mounting software has been known to fail with Japanese games, so please use Daemontools Lite - it's completely free)
#DO NOT autorun, but explore the mounted dvd and right-click <tt>Startup.exe</tt> and select ''Run with Japanese locale as administrator'' (you need [http://www.hongfire.com/forum/showthread.php/328830 HF pApploc] for the right-click options).
#Click the second button from the top to start the Sexy Beach Premium Resort setup.
#Click (N) a few times and wait while the setup installs.
#About two-thirds the setup will ask for disk 2, so mount DISK2.mdf and then click OK.
#To run the game, simply right-click the <tt>InitSettings.exe</tt> in the game folder (or the shortcut linked to it), select ''Run with Japanese locale as administrator'' to open the launcher and then click the ''ゲーム開始'' button on the far left to run the game.

==Simple step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) from .rar archive(s) to e.g. <tt>C:\Downloads\SBPR</tt>
#Extract the content of both .mdf files (using 7-Zip or WinRAR) to e.g. <tt>C:\Downloads\SBPR\setup</tt>, overwriting existing files. You should end up with five .cab files in there.
#Start <tt>setup.exe</tt>. The locale doesn't matter in this case.
#Click (N) a few times and wait while the setup installs.
#Run <tt>InitSettings.exe</tt> in the game folder to change video options (resolution and picture quality) in accordance with your preferences and hardware.
#Once you're satisfied with video options, you can skip the launcher and run the game or poser directly from the appropriate executable (SexyBeachPR_32.exe, SexyBeachStudio_64.exe etc.) in the game directory.

Sexy Beach Premium Resort/FAQ Technical Help

2015-09-14T18:30:40Z

Dilldoe: /* FAQ */

{{Sexy_Beach_Premium_Resort}}
=FAQ=
*'''Q: The resolution I want to play at is not shown in the launcher. Is there anything I can do?''' A: You can manually override the resolution by editing <tt>UserData/setup.xml</tt> file. However, DO NOT run the launcher afterwards (because it will be reset your values to default 1280x720) unless you messed up and need a settings reset. Run the game executable (SexyBeachPR_32.exe etc.) DIRECTLY instead. Note that if you use non-16:9 resolution, some minor glitches may occur, during cut-scenes for example.

[[File:sbpr_focus_issue.jpg|thumb|Out of focus]]
*'''Q: Is there a way to get the close up on characters not to blur out (see picture "Out of focus" on the right)?''' A: It is caused by you having moved the focus point of the camera past the character (probably by "zooming" in by holding both mouse buttons). To fix it, click ''Reset camera'' or move the focus (white cross visible when moving the camera) to be at the center of the character. Click the right mouse button and move left/right to zoom instead of both mouse buttons.

*'''Q: The game lags. Is there a way to improve performance?''' A: I have an ATI R9 x280, quality 0, 1 or 2 is 10fps or less. Open Catalyst -> add SBPR to the 3D application list -> Overwrite all you can with ATI instead of allowing the 3D application to choose. The game will still be laggy, is maybe 20-26 fps and looks much better.

*'''Q: I need more in-game money and/or mini-games points. How do I cheat?''' A: Use either general cheating tools (such as Cheat Engine or ArtMoney) or edit your mainData.dat save file located in <tt>UserData\save</tt> directory using hex editor of your choice (make the backup first!). The value you're looking for is around offset 0x980. For example, new game starts with 3000, so you will see <tt>"B8 0B 00 00"</tt> byte sequence at offset 0x98A or so. If you want to have 1000000 instead, change that <tt>"B8 0B 00 00"</tt> to <tt>"40 42 0F 00"</tt>. Save game is unprotected as of now, so when you load this modified save, you'll have your million for free. As for the mini-games points, they are stored 4 (null) bytes past money.

*'''Q: How do I increase my massage skill past certain level?''' A: When you open your item box (M -> items) there is a green bar there. It's your current massage experience. You have to fill that bar before you advance your level. To do so - simply initiate some H scene (there is a bench and a couple beds near Guru so you don't need to walk far). Just enter and exit the scene a couple times and your bar will be filled, then talk to Guru again to level up.

*'''Q: How do I add my custom made girl in the game?''' A: On the title screen click the 'Sign Up' button. You'll see 2 list, list of your custom made girls (on the left) and list of girls on the island (on the right). Choose your custom made girl on the left list and add it to the right (use the button with the >>> in the middle of the screen). Click the 2nd button (on the right) on the bottom of the screen to accept change. Hard part now is to find the girl on the island cause she is randomly placed. Go into config and max out 'Heroine count on island' to improve your chance of finding her.
-Alternatively-
If you have a main girl (or any girl) with 3 stars. Ask them out (option where they follow you) and go into the Dressing Room (F). There you can replace that girl with your custom girl and go straight into H scenes without having to get more hearts.

=Installing the Game=

==Quick step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) to e.g. <tt>C:\Downloads\SBPR</tt>
#Mount <tt>C:\Downloads\SBPR\DISK1.mdf</tt> with [http://www.disk-tools.com/download/daemon Daemontools Lite] (other mounting software has been known to fail with Japanese games, so please use Daemontools Lite - it's completely free)
#DO NOT autorun, but explore the mounted dvd and right-click <tt>Startup.exe</tt> and select ''Run with Japanese locale as administrator'' (you need [http://www.hongfire.com/forum/showthread.php/328830 HF pApploc] for the right-click options).
#Click the second button from the top to start the Sexy Beach Premium Resort setup.
#Click (N) a few times and wait while the setup installs.
#About two-thirds the setup will ask for disk 2, so mount DISK2.mdf and then click OK.
#To run the game, simply right-click the <tt>InitSettings.exe</tt> in the game folder (or the shortcut linked to it), select ''Run with Japanese locale as administrator'' to open the launcher and then click the ''ゲーム開始'' button on the far left to run the game.

==Simple step-by-step guide==
#Extract DISK1.mdf and DISK2.mdf (DO NOT extract the .mds file!) from .rar archive(s) to e.g. <tt>C:\Downloads\SBPR</tt>
#Extract the content of both .mdf files (using 7-Zip or WinRAR) to e.g. <tt>C:\Downloads\SBPR\setup</tt>, overwriting existing files. You should end up with five .cab files in there.
#Start <tt>setup.exe</tt>. The locale doesn't matter in this case.
#Click (N) a few times and wait while the setup installs.
#Run <tt>InitSettings.exe</tt> in the game folder to change video options (resolution and picture quality) in accordance with your preferences and hardware.
#Once you're satisfied with video options, you can skip the launcher and run the game or poser directly from the appropriate executable (SexyBeachPR_32.exe, SexyBeachStudio_64.exe etc.) in the game directory.

Sexy Beach Premium Resort/Technical Help

2015-09-14T05:13:32Z

Dilldoe: /* Config Settings */

{{Sexy_Beach_Premium_Resort}}{{stub}}
= Game Performance =

== Config Settings ==
[[File:config.jpg|500px|thumb|center|SBPR config menu]]
Items with "(?)" need better description of what they do and understanding of what item does is low. Items number 10 and after apply only to H scenes.
# Display Crosshair
# Real-time Shadows toggle
# Max Number of Heroines to Load (Max 15 if Studio DLC is installed)
# Max Number of Mob NPC's to Load
# Level/Map loading limit
# Toggle Scanner/Radar ('''''May prevent loading of Heroines, can fix by renabling and waiting for reloading''''')
# Scanner/Radar Range
# Invert Horizontal Camera Rotation
# Invert Vertical Camera Rotation
# Girls Gaze, fixed or looking at camera during H
# Girls Head, fixed or Looking at camera during H
# Display Player Toggle
# Display Player (penis) Toggle
# Self-help hidden obstacle (?)
# Display Males Ejaculation Effect Toggle
# Display Mob NPC's During H (?)
# Display Help During H
# Automatically Reset Camera During H Scene Change

== FAQ ==

Play Club/Modding/Savegame Hacking

2015-05-04T23:41:16Z

Dilldoe: /* Replacing Default Story Mode Characters */

{{Play Club}}
=Foreword=
Save files are stored as

PlayClub\UserData\save\Game\*.gsd

'''Backup your saves''' and arm yourself with a hex editor of your choice.

If you have none, something as simple as HxD or XVI32 will be enough for our needs, because we'll be doing basic editing only.

This also applies to save files - start a new game and immediately save it if you don't have any save files at all or don't want to use existing ones.

HF patch also comes with a 100% save, so you could just use that if that's what you're looking for. If you don't want to download the whole 300MB of it, have something against heavily used (by someone else) waifus or simply want to mess with your own save file because reasons, read on.

==Save version==
Save formats are slightly different in a vanilla PlayClub and a game with DLC installed (as confirmed by bald and naked girls appearing in a vanilla game if they come from the DLC-enabled game). In practice, this means that you'll have to use more null bytes in a DLC-enabled save. As a rule, if nothing is happening when you're trying to load the modified save in your DLC-enabled game, append more null bytes and try again.

=Cheats=
From here on, "Double word" or a "DWORD" for short is a name of 4 consecutive bytes that store an unsigned integer, often human-readable in a hex editor as is. For example, "01 00 00 00" means 1 and "05 00 00 00" means "5". Note the null bytes on the right, this is how numbers with least significant byte first look like (aka LSF, little endian or Intel byte order).

If the number stored in 4 bytes is not an integer, it's most likely a float(ing point value). Floats 1.0 and 5.0 from the previous example in a hex editor will look like "00 00 80 3F" and "00 00 A0 40". Not too intuitive, obviously, so having your hex editor automatically interpret them for you can be very useful, at least until a proper save editor shows up. Which may or may not happen since there's not much to edit anyway, so let's get to business already.

===Skip intro H-scenes===

Zero out the end of the save file, only leaving DWORD after the END marker intact. Vanilla save needs at least 9 null bytes after the DWORD, save with DLC needs at least 19.
"END" 7B C9 06 00 00 00 00 00 00 00 00 00 01 00 0A "Event01_00" <- end of a legit new game save file
"END" 7B C9 06 00 00 00 00 00 00 00 00 00 00 <- no-intro in vanilla game (9 null bytes after the DWORD)
The remainder of the save doesn't matter, it can be cut off after at least 9 (or 19 if using DLC) null bytes. "END", "Event01_00" and other non-hexadecimal text strings don't appear in a hex view area of a hex editor, naturally. Your hex editor will display them to the right of the hex view area, they're only shown here for easier navigation.

===Unlock free H===
Insert DWORD >32768 immediately after the last float of the last "Map##" entry at the end of the file, then add at least 1 null byte.

If you haven't had any H-scenes after the intro yet (or simply skipped it using the hack above), enter any post-intro H-scene, do something (or nothing), leave it and save the game. This will give you at least one "Map##" entry at the end of your save file. You could manually type it in yourself in a hex editor if you wanted, of course. For example:
"END" 7B C9 06 00 01 00 00 00 05 "Map09" 00 00 80 3F <- "Map09" followed by float(1.0) here
"END" 7B C9 06 00 01 00 00 00 05 "Map09" 00 00 80 3F FF FF FF FF 00 <- adding max DWORD and a null byte

===Custom hearts levels===
Hearts levels are stored in 12-byte groups immediately after the timestamp at the very beginning of the save file. The first byte (actually a DWORD) of every group is the important one: 
values 1 to 5 are legit levels (from empty heart to filled heart), 
0 is the same as / gets reset to 1 on a next save, 
6 is a maximum horniness (of a free H mode), 
higher values glitch out the girl's face animation (locking it in a neutral state thus muting her).

Said 12-byte groups belong to (respectively): 
Asae, Yayoi, Akane, Momiji, Rinko

So the beginning of your save file starts with two DWORDs (indicating the save version - either (0,0) of vanilla or (0,1) of DLC for now), then something like:
08 "New Game" 13 "2015/04/30 12:34:56" 01 00 00 00 00 ... <- Asae hates sex
08 "Cheater!" 13 "2015/16/17 18:19:20" 06 00 00 00 00 ... <- Asae wants sex

Note that values higher than 1 unlock controls in intro H-scenes (where you aren't supposed to have any). If you finish the intro scene in an unexpected way, the UI will become unresponsive and/or inaccessible, forcing you to exit and reload. Don't improvise too much or, better yet, skip the intro as above if you haven't completed it yet.

Also note that Kiryuu sisters can be deflowered during scripted intro H-scenes ONLY. There will be no blood even if you skip the intro using the save file made immediately after starting the new game.



===Replacing Default Story Mode Characters===

You can replace the default characters in the Story Mode with the ones you created.

The default characters in the Story Mode is located in the folder: ''\PlayClub_Data\StreamingAssets\Heroines''

To replace them:
* Rename the file name in the ''Heroines'' folder to something else (ie. Akane.png.bak)
* Copy your character from your chara folder (''\UserData\chara'') to the Heroines folder (\PlayClub_Data\StreamingAssets\Heroines)
* Rename your character file to the one you wish to replace (ie. yourcharacter.png -> Akane.png)

Now you can start a new game OR continue in Breaking/Training Mode to see your characters in the story instead of the default ones.

Play Club/Modding/Savegame Hacking

2015-05-04T21:01:11Z

Dilldoe:

{{Play Club}}
=Foreword=
Save files are stored as

PlayClub\UserData\save\Game\*.gsd

'''Backup your saves''' and arm yourself with a hex editor of your choice.

If you have none, something as simple as HxD or XVI32 will be enough for our needs, because we'll be doing basic editing only.

This also applies to save files - start a new game and immediately save it if you don't have any save files at all or don't want to use existing ones.

HF patch also comes with a 100% save, so you could just use that if that's what you're looking for. If you don't want to download the whole 300MB of it, have something against heavily used (by someone else) waifus or simply want to mess with your own save file because reasons, read on.

==Save version==
Save formats are slightly different in a vanilla PlayClub and a game with DLC installed (as confirmed by bald and naked girls appearing in a vanilla game if they come from the DLC-enabled game). In practice, this means that you'll have to use more null bytes in a DLC-enabled save. As a rule, if nothing is happening when you're trying to load the modified save in your DLC-enabled game, append more null bytes and try again.

=Cheats=
From here on, "Double word" or a "DWORD" for short is a name of 4 consecutive bytes that store an unsigned integer, often human-readable in a hex editor as is. For example, "01 00 00 00" means 1 and "05 00 00 00" means "5". Note the null bytes on the right, this is how numbers with least significant byte first look like (aka LSF, little endian or Intel byte order).

If the number stored in 4 bytes is not an integer, it's most likely a float(ing point value). Floats 1.0 and 5.0 from the previous example in a hex editor will look like "00 00 80 3F" and "00 00 A0 40". Not too intuitive, obviously, so having your hex editor automatically interpret them for you can be very useful, at least until a proper save editor shows up. Which may or may not happen since there's not much to edit anyway, so let's get to business already.

===Skip intro H-scenes===

Zero out the end of the save file, only leaving DWORD after the END marker intact. Vanilla save needs at least 9 null bytes after the DWORD, save with DLC needs at least 19.
"END" 7B C9 06 00 00 00 00 00 00 00 00 00 01 00 0A "Event01_00" <- end of a legit new game save file
"END" 7B C9 06 00 00 00 00 00 00 00 00 00 00 <- no-intro in vanilla game (9 null bytes after the DWORD)
The remainder of the save doesn't matter, it can be cut off after at least 9 (or 19 if using DLC) null bytes. "END", "Event01_00" and other non-hexadecimal text strings don't appear in a hex view area of a hex editor, naturally. Your hex editor will display them to the right of the hex view area, they're only shown here for easier navigation.

===Unlock free H===
Insert DWORD >32768 immediately after the last float of the last "Map##" entry at the end of the file, then add at least 1 null byte.

If you haven't had any H-scenes after the intro yet (or simply skipped it using the hack above), enter any post-intro H-scene, do something (or nothing), leave it and save the game. This will give you at least one "Map##" entry at the end of your save file. You could manually type it in yourself in a hex editor if you wanted, of course. For example:
"END" 7B C9 06 00 01 00 00 00 05 "Map09" 00 00 80 3F <- "Map09" followed by float(1.0) here
"END" 7B C9 06 00 01 00 00 00 05 "Map09" 00 00 80 3F FF FF FF FF 00 <- adding max DWORD and a null byte

===Custom hearts levels===
Hearts levels are stored in 12-byte groups immediately after the timestamp at the very beginning of the save file. The first byte (actually a DWORD) of every group is the important one: 
values 1 to 5 are legit levels (from empty heart to filled heart), 
0 is the same as / gets reset to 1 on a next save, 
6 is a maximum horniness (of a free H mode), 
higher values glitch out the girl's face animation (locking it in a neutral state thus muting her).

Said 12-byte groups belong to (respectively): 
Asae, Yayoi, Akane, Momiji, Rinko

So the beginning of your save file starts with two DWORDs (indicating the save version - either (0,0) of vanilla or (0,1) of DLC for now), then something like:
08 "New Game" 13 "2015/04/30 12:34:56" 01 00 00 00 00 ... <- Asae hates sex
08 "Cheater!" 13 "2015/16/17 18:19:20" 06 00 00 00 00 ... <- Asae wants sex

Note that values higher than 1 unlock controls in intro H-scenes (where you aren't supposed to have any). If you finish the intro scene in an unexpected way, the UI will become unresponsive and/or inaccessible, forcing you to exit and reload. Don't improvise too much or, better yet, skip the intro as above if you haven't completed it yet.

Also note that Kiryuu sisters can be deflowered during scripted intro H-scenes ONLY. There will be no blood even if you skip the intro using the save file made immediately after starting the new game.



===Replacing Default Story Mode Characters===

You can replace the default characters in the Story Mode with the ones you created.

The default characters in the Story Mode is located in the folder: ''\PlayClub_Data\StreamingAssets\Heroines''

To replace them:
* Rename the file name to something else (ie. Akane.png.bak)
* Copy your character from your chara folder (''\UserData\chara'') to the Heroines folder (\PlayClub_Data\StreamingAssets\Heroines)
* Rename your character file to the one your wish to replace (ie. yourcharacter.png -> Akane.png)

Now you can start a new game OR continue in Breaking/Training Mode to see your characters in the story instead of the default ones.

Play Club/Modding/Savegame Hacking

2015-05-04T20:58:54Z

Dilldoe: /* Replacing Default Story Mode Characters */

{{Play Club}}
=Foreword=
Save files are stored as

PlayClub\UserData\save\Game\*.gsd

'''Backup your saves''' and arm yourself with a hex editor of your choice.

If you have none, something as simple as HxD or XVI32 will be enough for our needs, because we'll be doing basic editing only.

This also applies to save files - start a new game and immediately save it if you don't have any save files at all or don't want to use existing ones.

HF patch also comes with a 100% save, so you could just use that if that's what you're looking for. If you don't want to download the whole 300MB of it, have something against heavily used (by someone else) waifus or simply want to mess with your own save file because reasons, read on.

==Save version==
Save formats are slightly different in a vanilla PlayClub and a game with DLC installed (as confirmed by bald and naked girls appearing in a vanilla game if they come from the DLC-enabled game). In practice, this means that you'll have to use more null bytes in a DLC-enabled save. As a rule, if nothing is happening when you're trying to load the modified save in your DLC-enabled game, append more null bytes and try again.

=Cheats=
From here on, "Double word" or a "DWORD" for short is a name of 4 consecutive bytes that store an unsigned integer, often human-readable in a hex editor as is. For example, "01 00 00 00" means 1 and "05 00 00 00" means "5". Note the null bytes on the right, this is how numbers with least significant byte first look like (aka LSF, little endian or Intel byte order).

If the number stored in 4 bytes is not an integer, it's most likely a float(ing point value). Floats 1.0 and 5.0 from the previous example in a hex editor will look like "00 00 80 3F" and "00 00 A0 40". Not too intuitive, obviously, so having your hex editor automatically interpret them for you can be very useful, at least until a proper save editor shows up. Which may or may not happen since there's not much to edit anyway, so let's get to business already.

===Skip intro H-scenes===

Zero out the end of the save file, only leaving DWORD after the END marker intact. Vanilla save needs at least 9 null bytes after the DWORD, save with DLC needs at least 19.
"END" 7B C9 06 00 00 00 00 00 00 00 00 00 01 00 0A "Event01_00" <- end of a legit new game save file
"END" 7B C9 06 00 00 00 00 00 00 00 00 00 00 <- no-intro in vanilla game (9 null bytes after the DWORD)
The remainder of the save doesn't matter, it can be cut off after at least 9 (or 19 if using DLC) null bytes. "END", "Event01_00" and other non-hexadecimal text strings don't appear in a hex view area of a hex editor, naturally. Your hex editor will display them to the right of the hex view area, they're only shown here for easier navigation.

===Unlock free H===
Insert DWORD >32768 immediately after the last float of the last "Map##" entry at the end of the file, then add at least 1 null byte.

If you haven't had any H-scenes after the intro yet (or simply skipped it using the hack above), enter any post-intro H-scene, do something (or nothing), leave it and save the game. This will give you at least one "Map##" entry at the end of your save file. You could manually type it in yourself in a hex editor if you wanted, of course. For example:
"END" 7B C9 06 00 01 00 00 00 05 "Map09" 00 00 80 3F <- "Map09" followed by float(1.0) here
"END" 7B C9 06 00 01 00 00 00 05 "Map09" 00 00 80 3F FF FF FF FF 00 <- adding max DWORD and a null byte

===Custom hearts levels===
Hearts levels are stored in 12-byte groups immediately after the timestamp at the very beginning of the save file. The first byte (actually a DWORD) of every group is the important one: 
values 1 to 5 are legit levels (from empty heart to filled heart), 
0 is the same as / gets reset to 1 on a next save, 
6 is a maximum horniness (of a free H mode), 
higher values glitch out the girl's face animation (locking it in a neutral state thus muting her).

Said 12-byte groups belong to (respectively): 
Asae, Yayoi, Akane, Momiji, Rinko

So the beginning of your save file starts with two DWORDs (indicating the save version - either (0,0) of vanilla or (0,1) of DLC for now), then something like:
08 "New Game" 13 "2015/04/30 12:34:56" 01 00 00 00 00 ... <- Asae hates sex
08 "Cheater!" 13 "2015/16/17 18:19:20" 06 00 00 00 00 ... <- Asae wants sex

Note that values higher than 1 unlock controls in intro H-scenes (where you aren't supposed to have any). If you finish the intro scene in an unexpected way, the UI will become unresponsive and/or inaccessible, forcing you to exit and reload. Don't improvise too much or, better yet, skip the intro as above if you haven't completed it yet.

Also note that Kiryuu sisters can be deflowered during scripted intro H-scenes ONLY. There will be no blood even if you skip the intro using the save file made immediately after starting the new game.



===Replacing Default Story Mode Characters===

You can replace the default characters in the Story Mode with the ones you created.

The default characters in the Story Mode is located in the folder: \PlayClub_Data\StreamingAssets\Heroines

To replace them, just rename the file name to something else (ie. Akane.png.bak)
Copy your character from your chara folder (\UserData\chara) to the Heroines folder (\PlayClub_Data\StreamingAssets\Heroines)
and rename it to the one your wish to replace (ie. yourcharacter.png -> Akane.png)

Now you can start a new game OR continue in Breaking/Training Mode to see your characters in the story instead of the default ones.

Play Club/Modding/Savegame Hacking

2015-05-04T20:57:35Z

Dilldoe:

{{Play Club}}
=Foreword=
Save files are stored as

PlayClub\UserData\save\Game\*.gsd

'''Backup your saves''' and arm yourself with a hex editor of your choice.

If you have none, something as simple as HxD or XVI32 will be enough for our needs, because we'll be doing basic editing only.

This also applies to save files - start a new game and immediately save it if you don't have any save files at all or don't want to use existing ones.

HF patch also comes with a 100% save, so you could just use that if that's what you're looking for. If you don't want to download the whole 300MB of it, have something against heavily used (by someone else) waifus or simply want to mess with your own save file because reasons, read on.

==Save version==
Save formats are slightly different in a vanilla PlayClub and a game with DLC installed (as confirmed by bald and naked girls appearing in a vanilla game if they come from the DLC-enabled game). In practice, this means that you'll have to use more null bytes in a DLC-enabled save. As a rule, if nothing is happening when you're trying to load the modified save in your DLC-enabled game, append more null bytes and try again.

=Cheats=
From here on, "Double word" or a "DWORD" for short is a name of 4 consecutive bytes that store an unsigned integer, often human-readable in a hex editor as is. For example, "01 00 00 00" means 1 and "05 00 00 00" means "5". Note the null bytes on the right, this is how numbers with least significant byte first look like (aka LSF, little endian or Intel byte order).

If the number stored in 4 bytes is not an integer, it's most likely a float(ing point value). Floats 1.0 and 5.0 from the previous example in a hex editor will look like "00 00 80 3F" and "00 00 A0 40". Not too intuitive, obviously, so having your hex editor automatically interpret them for you can be very useful, at least until a proper save editor shows up. Which may or may not happen since there's not much to edit anyway, so let's get to business already.

===Skip intro H-scenes===

Zero out the end of the save file, only leaving DWORD after the END marker intact. Vanilla save needs at least 9 null bytes after the DWORD, save with DLC needs at least 19.
"END" 7B C9 06 00 00 00 00 00 00 00 00 00 01 00 0A "Event01_00" <- end of a legit new game save file
"END" 7B C9 06 00 00 00 00 00 00 00 00 00 00 <- no-intro in vanilla game (9 null bytes after the DWORD)
The remainder of the save doesn't matter, it can be cut off after at least 9 (or 19 if using DLC) null bytes. "END", "Event01_00" and other non-hexadecimal text strings don't appear in a hex view area of a hex editor, naturally. Your hex editor will display them to the right of the hex view area, they're only shown here for easier navigation.

===Unlock free H===
Insert DWORD >32768 immediately after the last float of the last "Map##" entry at the end of the file, then add at least 1 null byte.

If you haven't had any H-scenes after the intro yet (or simply skipped it using the hack above), enter any post-intro H-scene, do something (or nothing), leave it and save the game. This will give you at least one "Map##" entry at the end of your save file. You could manually type it in yourself in a hex editor if you wanted, of course. For example:
"END" 7B C9 06 00 01 00 00 00 05 "Map09" 00 00 80 3F <- "Map09" followed by float(1.0) here
"END" 7B C9 06 00 01 00 00 00 05 "Map09" 00 00 80 3F FF FF FF FF 00 <- adding max DWORD and a null byte

===Custom hearts levels===
Hearts levels are stored in 12-byte groups immediately after the timestamp at the very beginning of the save file. The first byte (actually a DWORD) of every group is the important one: 
values 1 to 5 are legit levels (from empty heart to filled heart), 
0 is the same as / gets reset to 1 on a next save, 
6 is a maximum horniness (of a free H mode), 
higher values glitch out the girl's face animation (locking it in a neutral state thus muting her).

Said 12-byte groups belong to (respectively): 
Asae, Yayoi, Akane, Momiji, Rinko

So the beginning of your save file starts with two DWORDs (indicating the save version - either (0,0) of vanilla or (0,1) of DLC for now), then something like:
08 "New Game" 13 "2015/04/30 12:34:56" 01 00 00 00 00 ... <- Asae hates sex
08 "Cheater!" 13 "2015/16/17 18:19:20" 06 00 00 00 00 ... <- Asae wants sex

Note that values higher than 1 unlock controls in intro H-scenes (where you aren't supposed to have any). If you finish the intro scene in an unexpected way, the UI will become unresponsive and/or inaccessible, forcing you to exit and reload. Don't improvise too much or, better yet, skip the intro as above if you haven't completed it yet.

Also note that Kiryuu sisters can be deflowered during scripted intro H-scenes ONLY. There will be no blood even if you skip the intro using the save file made immediately after starting the new game.



===Replacing Default Story Mode Characters===

You can replace the default characters in the Story Mode with the ones you created.

The default characters in the Story Mode is located in the folder: \PlayClub_Data\StreamingAssets\Heroines

To replace them, just rename the file name to something else (ie. Akane.png.bak)
Copy your character from your chara folder (\UserData\chara) to the Heroines folder (\PlayClub_Data\StreamingAssets\Heroines) and rename it to the one your wish to replace (ie. yourcharacter.png -> Akane.png)

Now you can start a new game OR continue in Breaking/Training Mode to see your characters in the story instead of the default ones.

Template:Nav/Play Club

2015-05-04T20:56:13Z

Dilldoe:

Play Club/Story Characters

2015-05-04T20:37:16Z

Dilldoe: Replace default story characters with your own

You can replace the default characters in the Story Mode with the ones you created.

The default characters in the Story Mode is located in the folder: \PlayClub_Data\StreamingAssets\Heroines

To replace them, just rename the file name to something else (ie. Akane.png.bak)
Copy your character from your chara folder (\UserData\chara) to the Heroines folder (\PlayClub_Data\StreamingAssets\Heroines) and rename it to the one your wish to replace (ie. yourcharacter.png -> Akane.png)

Now you can start a new game OR continue in Breaking/Training Mode to see your characters in the story instead of the default ones.

Template:Nav/Play Club

2015-05-04T20:31:22Z

Dilldoe:

Template:Nav/Play Club

2015-05-04T20:30:32Z

Dilldoe: added replacing characters in story mode